| Heikenei Code | Type | Dimension Type | Clamping Diameter | Type of Precision | Product | Balance | Clamping Range | DIN | D | L | Notes |
| HEI.6000870 | ER | 16 | 1,0-0,5 | GRADE-2 | COLLET | MAX. 15-20 MICRON RUN OUT | 0.5MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | In shanks between Ø1-3mm, the shrinking capacity is Ø -0.5mm. |
| HEI.6000880 | ER | 16 | 1,5-1,0 | GRADE-2 | COLLET | MAX. 15-20 MICRON RUN OUT | 0.5MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | In shanks between Ø1-3mm, the shrinking capacity is Ø -0.5mm. |
| HEI.6000890 | ER | 16 | 2,0-1,5 | GRADE-2 | COLLET | MAX. 15-20 MICRON RUN OUT | 0.5MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | In shanks between Ø1-3mm, the shrinking capacity is Ø -0.5mm. |
| HEI.6000900 | ER | 16 | 2,5-2,0 | GRADE-2 | COLLET | MAX. 15-20 MICRON RUN OUT | 0.5MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | In shanks between Ø1-3mm, the shrinking capacity is Ø -0.5mm. |
| HEI.6000910 | ER | 16 | 3,0-2,5 | GRADE-2 | COLLET | MAX. 15-20 MICRON RUN OUT | 0.5MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | In shanks between Ø1-3mm, the shrinking capacity is Ø -0.5mm. |
| HEI.6000920 | ER | 16 | 3,5-2,5 | GRADE-2 | COLLET | MAX. 15-20 MICRON RUN OUT | 1.0MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | |
| HEI.6000930 | ER | 16 | 4,0-3,0 | GRADE-2 | COLLET | MAX. 15-20 MICRON RUN OUT | 1.0MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | |
| HEI.6000940 | ER | 16 | 4,5-3,5 | GRADE-2 | COLLET | MAX. 15-20 MICRON RUN OUT | 1.0MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | |
| HEI.6000950 | ER | 16 | 5,0-4,0 | GRADE-2 | COLLET | MAX. 15-20 MICRON RUN OUT | 1.0MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | |
| HEI.6000960 | ER | 16 | 5,5-4,5 | GRADE-2 | COLLET | MAX. 15-20 MICRON RUN OUT | 1.0MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | |
| HEI.6000970 | ER | 16 | 6,0-5,0 | GRADE-2 | COLLET | MAX. 15-20 MICRON RUN OUT | 1.0MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | |
| HEI.6000980 | ER | 16 | 6,5-5,5 | GRADE-2 | COLLET | MAX. 15-20 MICRON RUN OUT | 1.0MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | |
| HEI.6000990 | ER | 16 | 7,0-6,0 | GRADE-2 | COLLET | MAX. 15-20 MICRON RUN OUT | 1.0MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | |
| HEI.6001000 | ER | 16 | 7,5-6,5 | GRADE-2 | COLLET | MAX. 15-20 MICRON RUN OUT | 1.0MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | |
| HEI.6001010 | ER | 16 | 8,0-7,0 | GRADE-2 | COLLET | MAX. 15-20 MICRON RUN OUT | 1.0MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | |
| HEI.6001020 | ER | 16 | 8,5-7,5 | GRADE-2 | COLLET | MAX. 15-20 MICRON RUN OUT | 1.0MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | |
| HEI.6001030 | ER | 16 | 9,0-8,0 | GRADE-2 | COLLET | MAX. 15-20 MICRON RUN OUT | 1.0MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | |
| HEI.6001040 | ER | 16 | 9,5-8,5 | GRADE-2 | COLLET | MAX. 15-20 MICRON RUN OUT | 1.0MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | |
| HEI.6001050 | ER | 16 | 10,0-9,0 | GRADE-2 | COLLET | MAX. 15-20 MICRON RUN OUT | 1.0MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | |
| HEI.6001060 | ER | 16 | 10,5-10,3 | GRADE-2 | COLLET | MAX. 15-20 MICRON RUN OUT | 0.2MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | * Ø>10 (diameter over 10mm) shanks are shorter than the standard. The shrinking capacity is only Ø -0.2mm. |
| HEI.6001070 | ER | 16 | 11,0-10,8 | GRADE-2 | COLLET | MAX. 15-20 MICRON RUN OUT | 0.2MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | * Ø>10 (diameter over 10mm) shanks are shorter than the standard. The shrinking capacity is only Ø -0.2mm. |
| HEI.6001080 | ER | 16 | 11,5-11,3 | GRADE-2 | COLLET | MAX. 15-20 MICRON RUN OUT | 0.2MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | * Ø>10 (diameter over 10mm) shanks are shorter than the standard. The shrinking capacity is only Ø -0.2mm. |
| HEI.6001090 | ER | 16 | 12,0-11,8 | GRADE-2 | COLLET | MAX. 15-20 MICRON RUN OUT | 0.2MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | * Ø>10 (diameter over 10mm) shanks are shorter than the standard. The shrinking capacity is only Ø -0.2mm. |
| HEI.6001100 | ER | 16 | 12,5-12,3 | GRADE-2 | COLLET | MAX. 15-20 MICRON RUN OUT | 0.2MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | * Ø>10 (diameter over 10mm) shanks are shorter than the standard. The shrinking capacity is only Ø -0.2mm. |
| HEI.6001110 | ER | 16 | 1,0-0,5 | GRADE-1 | COLLET | MAX. 10 MICRON RUN OUT | 0.5MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | * In shanks between Ø1-3mm, the shrinking capacity is Ø -0.5mm. |
| HEI.6001120 | ER | 16 | 1,5-1,0 | GRADE-1 | COLLET | MAX. 10 MICRON RUN OUT | 0.5MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | * In shanks between Ø1-3mm, the shrinking capacity is Ø -0.5mm. |
| HEI.6001130 | ER | 16 | 2,0-1,5 | GRADE-1 | COLLET | MAX. 10 MICRON RUN OUT | 0.5MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | * In shanks between Ø1-3mm, the shrinking capacity is Ø -0.5mm. |
| HEI.6001140 | ER | 16 | 2,5-2,0 | GRADE-1 | COLLET | MAX. 10 MICRON RUN OUT | 0.5MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | * In shanks between Ø1-3mm, the shrinking capacity is Ø -0.5mm. |
| HEI.6001150 | ER | 16 | 3,0-2,5 | GRADE-1 | COLLET | MAX. 10 MICRON RUN OUT | 0.5MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | * In shanks between Ø1-3mm, the shrinking capacity is Ø -0.5mm. |
| HEI.6001160 | ER | 16 | 3,5-2,5 | GRADE-1 | COLLET | MAX. 10 MICRON RUN OUT | 1.0MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | |
| HEI.6001170 | ER | 16 | 4,0-3,0 | GRADE-1 | COLLET | MAX. 10 MICRON RUN OUT | 1.0MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | |
| HEI.6001180 | ER | 16 | 4,5-3,5 | GRADE-1 | COLLET | MAX. 10 MICRON RUN OUT | 1.0MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | |
| HEI.6001190 | ER | 16 | 5,0-4,0 | GRADE-1 | COLLET | MAX. 10 MICRON RUN OUT | 1.0MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | |
| HEI.6001200 | ER | 16 | 5,5-4,5 | GRADE-1 | COLLET | MAX. 10 MICRON RUN OUT | 1.0MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | |
| HEI.6001210 | ER | 16 | 6,0-5,0 | GRADE-1 | COLLET | MAX. 10 MICRON RUN OUT | 1.0MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | |
| HEI.6001220 | ER | 16 | 6,5-5,5 | GRADE-1 | COLLET | MAX. 10 MICRON RUN OUT | 1.0MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | |
| HEI.6001230 | ER | 16 | 7,0-6,0 | GRADE-1 | COLLET | MAX. 10 MICRON RUN OUT | 1.0MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | |
| HEI.6001240 | ER | 16 | 7,5-6,5 | GRADE-1 | COLLET | MAX. 10 MICRON RUN OUT | 1.0MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | |
| HEI.6001250 | ER | 16 | 8,0-7,0 | GRADE-1 | COLLET | MAX. 10 MICRON RUN OUT | 1.0MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | |
| HEI.6001260 | ER | 16 | 8,5-7,5 | GRADE-1 | COLLET | MAX. 10 MICRON RUN OUT | 1.0MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | |
| HEI.6001270 | ER | 16 | 9,0-8,0 | GRADE-1 | COLLET | MAX. 10 MICRON RUN OUT | 1.0MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | |
| HEI.6001280 | ER | 16 | 9,5-8,5 | GRADE-1 | COLLET | MAX. 10 MICRON RUN OUT | 1.0MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | |
| HEI.6001290 | ER | 16 | 10,0-9,0 | GRADE-1 | COLLET | MAX. 10 MICRON RUN OUT | 1.0MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | |
| HEI.6001300 | ER | 16 | 10,5-10,3 | GRADE-1 | COLLET | MAX. 10 MICRON RUN OUT | 0.2MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | * Ø>10 (diameter over 10mm) shanks are shorter than the standard. The shrinking capacity is only Ø -0.2mm. |
| HEI.6001310 | ER | 16 | 11,0-10,8 | GRADE-1 | COLLET | MAX. 10 MICRON RUN OUT | 0.2MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | * Ø>10 (diameter over 10mm) shanks are shorter than the standard. The shrinking capacity is only Ø -0.2mm. |
| HEI.6001320 | ER | 16 | 11,5-11,3 | GRADE-1 | COLLET | MAX. 10 MICRON RUN OUT | 0.2MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | * Ø>10 (diameter over 10mm) shanks are shorter than the standard. The shrinking capacity is only Ø -0.2mm. |
| HEI.6001330 | ER | 16 | 12,0-11,8 | GRADE-1 | COLLET | MAX. 10 MICRON RUN OUT | 0.2MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | * Ø>10 (diameter over 10mm) shanks are shorter than the standard. The shrinking capacity is only Ø -0.2mm. |
| HEI.6001340 | ER | 16 | 12,5-12,3 | GRADE-1 | COLLET | MAX. 10 MICRON RUN OUT | 0.2MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | * Ø>10 (diameter over 10mm) shanks are shorter than the standard. The shrinking capacity is only Ø -0.2mm. |
| HEI.6001350 | ER | 16 | 1,0-0,5 | PREMIUM | COLLET | MAX. 5 MICRON RUN OUT | 0.5MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | * In shanks between Ø1-3mm, the shrinking capacity is Ø -0.5mm. |
| HEI.6001360 | ER | 16 | 1,5-1,0 | PREMIUM | COLLET | MAX. 5 MICRON RUN OUT | 0.5MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | * In shanks between Ø1-3mm, the shrinking capacity is Ø -0.5mm. |
| HEI.6001370 | ER | 16 | 2,0-1,5 | PREMIUM | COLLET | MAX. 5 MICRON RUN OUT | 0.5MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | * In shanks between Ø1-3mm, the shrinking capacity is Ø -0.5mm. |
| HEI.6001380 | ER | 16 | 2,5-2,0 | PREMIUM | COLLET | MAX. 5 MICRON RUN OUT | 0.5MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | * In shanks between Ø1-3mm, the shrinking capacity is Ø -0.5mm. |
| HEI.6001390 | ER | 16 | 3,0-2,5 | PREMIUM | COLLET | MAX. 5 MICRON RUN OUT | 0.5MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | * In shanks between Ø1-3mm, the shrinking capacity is Ø -0.5mm. |
| HEI.6001400 | ER | 16 | 3,5-2,5 | PREMIUM | COLLET | MAX. 5 MICRON RUN OUT | 1.0MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | |
| HEI.6001410 | ER | 16 | 4,0-3,0 | PREMIUM | COLLET | MAX. 5 MICRON RUN OUT | 1.0MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | |
| HEI.6001420 | ER | 16 | 4,5-3,5 | PREMIUM | COLLET | MAX. 5 MICRON RUN OUT | 1.0MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | |
| HEI.6001430 | ER | 16 | 5,0-4,0 | PREMIUM | COLLET | MAX. 5 MICRON RUN OUT | 1.0MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | |
| HEI.6001440 | ER | 16 | 5,5-4,5 | PREMIUM | COLLET | MAX. 5 MICRON RUN OUT | 1.0MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | |
| HEI.6001450 | ER | 16 | 6,0-5,0 | PREMIUM | COLLET | MAX. 5 MICRON RUN OUT | 1.0MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | |
| HEI.6001460 | ER | 16 | 6,5-5,5 | PREMIUM | COLLET | MAX. 5 MICRON RUN OUT | 1.0MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | |
| HEI.6001470 | ER | 16 | 7,0-6,0 | PREMIUM | COLLET | MAX. 5 MICRON RUN OUT | 1.0MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | |
| HEI.6001480 | ER | 16 | 7,5-6,5 | PREMIUM | COLLET | MAX. 5 MICRON RUN OUT | 1.0MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | |
| HEI.6001490 | ER | 16 | 8,0-7,0 | PREMIUM | COLLET | MAX. 5 MICRON RUN OUT | 1.0MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | |
| HEI.6001500 | ER | 16 | 8,5-7,5 | PREMIUM | COLLET | MAX. 5 MICRON RUN OUT | 1.0MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | |
| HEI.6001510 | ER | 16 | 9,0-8,0 | PREMIUM | COLLET | MAX. 5 MICRON RUN OUT | 1.0MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | |
| HEI.6001520 | ER | 16 | 9,5-8,5 | PREMIUM | COLLET | MAX. 5 MICRON RUN OUT | 1.0MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | |
| HEI.6001530 | ER | 16 | 10,0-9,0 | PREMIUM | COLLET | MAX. 5 MICRON RUN OUT | 1.0MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | |
| HEI.6001540 | ER | 16 | 10,5-10,3 | PREMIUM | COLLET | MAX. 5 MICRON RUN OUT | 0.2MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | * Ø>10 (diameter over 10mm) shanks are shorter than the standard. The shrinking capacity is only Ø -0.2mm. |
| HEI.6001550 | ER | 16 | 11,0-10,8 | PREMIUM | COLLET | MAX. 5 MICRON RUN OUT | 0.2MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | * Ø>10 (diameter over 10mm) shanks are shorter than the standard. The shrinking capacity is only Ø -0.2mm. |
| HEI.6001560 | ER | 16 | 11,5-11,3 | PREMIUM | COLLET | MAX. 5 MICRON RUN OUT | 0.2MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | * Ø>10 (diameter over 10mm) shanks are shorter than the standard. The shrinking capacity is only Ø -0.2mm. |
| HEI.6001570 | ER | 16 | 12,0-11,8 | PREMIUM | COLLET | MAX. 5 MICRON RUN OUT | 0.2MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | * Ø>10 (diameter over 10mm) shanks are shorter than the standard. The shrinking capacity is only Ø -0.2mm. |
| HEI.6001580 | ER | 16 | 12,5-12,3 | PREMIUM | COLLET | MAX. 5 MICRON RUN OUT | 0.2MM | DIN 6499 / ISO 15488-B | 17MM | 27.5MM | * Ø>10 (diameter over 10mm) shanks are shorter than the standard. The shrinking capacity is only Ø -0.2mm. |
